Tag: paint
Revitalizing an old fence
If you have an older fence, you can revitalize it for minimal cost with a few pressure treated boards and outdoor stain. At the back of our property we had an older fence – it looked like it was about 10 years old. It was…
1986 Pontiac Fiero paint
I have been Photoshopping a few mock-ups of the paint scheme I’d like for the Fiero. I’m going to retain the gold colour, but add a satin black to the mix.
Installing a LCD screen mount with no stud anchors
If you need to install an LCD screen in an area that doesn’t have studs accessible to anchor the mount(s), then this post should help you out. There are two windows (on each side) where the LCD mount needed to be installed. The mount being…
Fiero floor pan – final coat of paint
The final coat of rubberized paint was applied to the floor pan (driver and passenger) before carpet installation.
Fiero alarm system wiring is done + more painting
I have completed the wiring of the alarm system. With all the black wire-loom, it looks like something from a sci-fi movie. I have also started painting the dash support pieces to match the rest of the interior trim.
Painting begins – Fiero interior pieces
I began painting the interior pieces for the Fiero. I used the Dupli-color plastic adhesive first, then a coat of matte-black Tremclad. I’m using the same recipe that I tested here.
